Custom
Standard

c29 TL

Built For

Rim brake equipped road bikes

Sizes

700c

Hole Count

20/24

Rim Inner Width

17.5mm

Effortless climbing, silky ride quality and solid handling make C29 TL desirable choice for road riders looking for a do all lightweight rim brake wheelset. Once you get past the buoyant 1260g figure, you’ll find C29 TL brings more to the table than scale-envy. The 363g rim is ready for any tubeless tire to complement the road-quieting 29mm rim depth section, while the Torch road chassis keeps handling true thanks to straight-pull spokes, and logical 2:1 rear wheel lacing.

This wheel has been discontinued

We are maintaining this page for informational purposes only.

Features

3 Pawl TORCH Freehub Body

Fast 60 P.O.E. drive configuration offers low drag and reliable 6 degree engagement.

SRAM XD-R Available

Compatible with SRAM road XD-R cassettes.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim Weight
700c1260g550g710g363g
Tire WidthTire TypeRider WeightInner Rim WidthOuter Rim Width
23-40Tubeless or Tube-Type Clincher230lbs or 104kg max 17.5 mm25.00 mm
Note:   Skewers Not Included

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Product must be purchased new from authorized dealer, valid for the original owner exclusively. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty. Use of tire inserts, tire casing type or tire air pressure being ridden does not alter or modify this warranty. Alloy rims can still be susceptible to impact damage when riding inserts, and/or using tires with heavy duty casings, and/or inflated to higher pressures.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.