Standard

1/1 Trail 650b

Built For

Disc brake gravel and CX bikes

Sizes

650b

Hole Count

28

Rim Inner Width

27.0mm

Expanding the 1/1 collection to drop bar bikes, the 1/1 Trail 650b brings advanced mountain technology to more riders on more routes. Designed for burlier rides that require more rubber on the ground, mount up any tires your bike frame will permit aboard our 27mm inner rim width trail rim. Accelerate with ease courtesy of the 4 degree freehub design providing responsive pedal feedback in a split second notice. Expand the map from your front door and make the 1/1 Trail 650b apart of your escape plans. Center Lock Only.

Features

6 Pawl 1/1 Freehub Body

Proven dual-phase configuration provides quick 4 degree engagement.

Classic J-Bend

Traditional and conventional flanged hubshell packed with i9 tech, but using a standard j-bend spoke and nipple.

SRAM XD-R Available

Compatible with SRAM road XD-R cassettes.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim Weight
650b1590g725g865g435g
Tire WidthTire TypeRider WeightInner Rim WidthOuter Rim Width
650X40-55Tubeless or Tube-Type Clincher280lbs or 127kg max 27.0 mm31 mm
Note:   Skewers Not Included

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Product must be purchased new from authorized dealer, valid for the original owner exclusively. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty. Use of tire inserts, tire casing type or tire air pressure being ridden does not alter or modify this warranty. Alloy rims can still be susceptible to impact damage when riding inserts, and/or using tires with heavy duty casings, and/or inflated to higher pressures.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.