Adapting to todayâ€™s XC and Trail bike tire preferences, the Ultralite line hits the refresh button with a wider 25mm inner rim width capable of seating tires ranging from 2.1â€-2.4â€ with ease. Say goodbye to pinch flats with a shallower rim profile and a wider bead wall built to hold strong through that misjudged rock move. Reduce arm pump fatigue with an optimized rim profile that improves radial compliance and traction capable of holding any line. Wrapped around the legendary Hydra mountain chassis by way of our 24 count aluminum spoke system, the UL250 is equally at home between the tape as at the big epic group ride. 6 Bolt Only.
The 24h System hub and spoke chassis creates a compliant, lightweight yet structurally sound wheelset. Thanks to a 2:1 lacing pattern, these wheels are ready for almost anything.
Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control.
High quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay.
Design the wheelset of your dreams using our custom wheel configurator. Pick and choose from 11 different anodized colors to create a look as colorful or stealth as you wish.
Shimano 11 + 12spd compatible.
Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required.
Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.
|Size||Set Weight||Front Weight||Rear Weight||Rim Weight|
|Tire Width||Tire Type||Rider Weight||Inner Rim Width||Outer Rim Width|
|2.1-2.4||Tubeless or Tube-Type Clincher||225lbs or 102kg max||25.0 mm||29 mm|
Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or firstname.lastname@example.org to set up a RMA # and discuss your needs.
|System Wheel Rebuild||$75*|
|Classic J Bend Wheel Re-build||$85*|
|Front Hub Service||$20*|
|Rear Hub Service||$40*|
|Basic Wheel True||$30*|
|Rim Replacements||Price varies depending on model|
*Rates are subject to change by our service team
All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.
We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Product must be purchased new from authorized dealer, valid for the original owner exclusively. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.
Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.
Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.
Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty. Use of tire inserts, tire casing type or tire air pressure being ridden does not alter or modify this warranty. Alloy rims can still be susceptible to impact damage when riding inserts, and/or using tires with heavy duty casings, and/or inflated to higher pressures.
We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.