Black

Hydra Trail S

Built For

XC to Aggressive Trails

Sizes

27.5" | 29"

Hole Count

28

Rim Inner Width

27.0mm

Hydra-powered, warp speed engagement courtesy our Asheville, North Carolina made hubset, aggressive tire friendly 27mm wide tubeless ready rims, and 28 straight-pull spokes. You'd think we were referring to the latest and money is no object wonder wheelset. Nope - all that is found on our Trail S. You'll be impressed by the amount of detail, features and ride quality, all at a price that'll leave plenty in the bike budget. 6 Bolt Only.

Features

6 Pawl HYDRA Freehub Body

Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yielding telepathic control.

S-Series

"S" is for steel, in this case the spokes. A high performance 28h hub and straight-pull spoke system, but in a more conventional, approachable and economical package.

Micro Spline

Shimano 11 + 12spd compatible.

Super Boost Available

Available for the latest frames employing Super Boost 157mm spacing.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim Weight
27.5"1550g715g835g430g
29"1695g785g910g455g
Tire WidthTire TypeRider WeightInner Rim WidthOuter Rim Width
2.2-2.5Tubeless or Tube-Type Clincher250lbs or 113kg max 27.0 mm31.00 mm

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Product must be purchased new from authorized dealer, valid for the original owner exclusively. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty. Use of tire inserts, tire casing type or tire air pressure being ridden does not alter or modify this warranty. Alloy rims can still be susceptible to impact damage when riding inserts, and/or using tires with heavy duty casings, and/or inflated to higher pressures.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.