Shannan Hauser

Shannan Hauser - Laser Commander

Trail S 1/1 28h

Built For

XC to Aggressive Trail

Sizes

27.5" | 29"

Hole Count

28

Rim Inner Width

27.0mm

The category-defying Trail S wheelset is laced to a 28 hole, 27mm rim offering a lightweight option for all-mountain riding. Utilizing conventional J bend Sapim steel spokes with a 3 cross interface, Trail S is eager to push the pace on the climb while leaving you grinning ear to ear on the descent.

Black

Features

Micro Spline

Shimano 11 + 12spd compatible.

6 Pawl 1/1 Freehub Body

Proven dual-phase configuration provides quick 4 degree engagement.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

Super Boost Available

Available for the latest frames employing Super Boost 157mm spacing.

Classic J-Bend

Traditonal and conventional flanged hubshell packed with i9 tech, but using a stanadard j-bend spoke and nipple.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim WeightInner Rim WidthOuter Rim Width
27.5"1650g760g890g430g27.0mm31.00mm
29"1770g820g950g455g27.0mm31.00mm
Tire WidthTire TypeRider Weight
2.2-2.5Tubeless or Tube-Type Clincher230lbs/104kg max

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

The intended application of Industry Nine products are non-motorized, single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.