Sean Hatten

Sean Hatten - Wheelbuilder

Big Rig 760 32h

Built For

Fatbikes

Sizes

26" | 27.5"

Hole Count

32

Rim Inner Width

76.0mm

Taking innovative design cues from Hed’s carbon rims, the heart of the BigRig760 is Hed’s BAD (Big Aluminum Deal) rim, an approachable aluminum rim at the weight of carbon. Offering easy tubeless set-up, low system weights and our legendary engagement that’s rated to 40-below, BigRig760 advances alloy rims into the high-performance realm once reserved for carbon only.

This wheel has been discontinued

We are maintaining this page for informational purposes only.

Level 3
Stock
Level 2
Level 3

Features

6 Pawl HYDRA Freehub Body

Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control.

32h Mountain System

Versatile, strong and stiff. Our 32h System hub and spoke chassis forms the foundation of our most capable wheelsets.

Direct Thread - Straight Pull

Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required.

Ano Lab Custom Color

Design the wheelset of your dreams using our custom wheel configurator. Pick and choose from 11 different anodized colors to create a look as colorful or stealth as you wish.

Micro Spline

Shimano 11 + 12spd compatible.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim WeightInner Rim WidthOuter Rim Width
26"2150g1010g1140g630g76.0mm80.00mm
27.5"2260g1065g1195g670g76.0mm80.00mm
Tire WidthTire TypeRider Weight
3.8-4.5Tubeless or Tube-Type Clincher230lbs/104kg max

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

The intended application of Industry Nine products are non-motorized, single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.