Jeremy Hume

Jeremy Hume - Engineering + Design

Back Country 450 32h

Built For

Plus Bikes or Fatbikes

Sizes

27.5"

Hole Count

32

Rim Inner Width

45.0mm

You’re all about the trail-leveling attack and undeniable grip of plus tires, but where to from here? Find your next stop with the BC450 and uncover new realms of responsiveness and engagement to keep taming singletrack. Whether bikepacking, giving a different assignment to your fatbike or simply covering miles of singletrack, BC450 is ready to join you on any adventure.

Level 3
Stock

Features

6 Pawl HYDRA Freehub Body

Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control.

32h Mountain System

Versatile, strong and stiff. Our 32h System hub and spoke chassis forms the foundation of our most capable wheelsets.

Premium Alloy Rim

High quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay.

Direct Thread - Straight Pull

Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required.

Ano Lab Custom Color

Design the wheelset of your dreams using our custom wheel configurator. Pick and choose from 11 different anodized colors to create a look as colorful or stealth as you wish.

Micro Spline

Shimano 11 + 12spd compatible.

Super Boost Available

Available for the latest frames employing Super Boost 157mm spacing.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim WeightInner Rim WidthOuter Rim Width
27.5"1950g915g1035g590g45.0mm48.80mm
Tire WidthTire TypeRider Weight
2.8-3.8Tubeless or Tube-Type Clincher270lbs/122kg max

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

The intended application of Industry Nine products are non-motorized, single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.