Classic J-Bend Road & CX Disc Hubs

Rd Disc Hub-142x100 Blue-Edit-2.jpg
Rd Disc Hub-142x100 Purp-2-Edit-2.jpg
Rd Disc Hub-142x100 Black-2-Edit-2.jpg
Rd Disc Hub-142x100 Grn.jpg
Rd Disc Hub-142x100 Red-2-Edit-2.jpg
Rd Disc Hub-142x100 Silver-2-Edit-2.jpg
Rd Disc Hub-142x100 Gold-Edit-2.jpg
Rd Disc Hub-142x100 Turq-Edit-2.jpg
Rd Disc Hub-142x100 Org-2-2.jpg
Rd Disc Hub-142x100 Pink-2-Edit-2.jpg
Rd Disc Hub-142x100 Lime-Edit.jpg
Rd Disc Hub-142x100 Blue-Edit-2.jpg
Rd Disc Hub-142x100 Purp-2-Edit-2.jpg
Rd Disc Hub-142x100 Black-2-Edit-2.jpg
Rd Disc Hub-142x100 Grn.jpg
Rd Disc Hub-142x100 Red-2-Edit-2.jpg
Rd Disc Hub-142x100 Silver-2-Edit-2.jpg
Rd Disc Hub-142x100 Gold-Edit-2.jpg
Rd Disc Hub-142x100 Turq-Edit-2.jpg
Rd Disc Hub-142x100 Org-2-2.jpg
Rd Disc Hub-142x100 Pink-2-Edit-2.jpg
Rd Disc Hub-142x100 Lime-Edit.jpg

Classic J-Bend Road & CX Disc Hubs

575.00
Add To Cart

  • Weight: Front hub 110g, Rear hub 245g
    355g/hubset
    Varies depending on bearing, endcap, and freehub spec
  • Driver: Shimano HG, SRAM HG or XD-R, or Campy.
    6 degree engagement, 3 pawl freehub, 60 point drivering
  • Front Axles: QR 100mm, 9x100mm, 12x100mm, 15x100mm
  • Rear Axles: QR 135mm, 10x135mm, 12x135mm, 12x142mm
  • Hole Count: 24, 28, or 32-hole

Featuring all of the advantages of the Torch freehub -low drag, low weight, and the ultimate in freehub compatibility- tied into a traditional, "Classic" hub.

The Torch road hubs use the same drive ring and pawls as the mountain hubs. However, we reduced the pawl count to 3 instead of 6 for lower drag and weight while still achieving an industry leading (for road hubs) 6 degree engagement.  Relocated bearings, and a new freehub seal reduce freehub drag while coasting.  

The Torch road hubs now feature custom Teflon contact seals for the end caps, which we manufacture in-house. They fully seal the hubs from mud and water - tight enough for a muddy CX season, but smooth enough for drag-free road miles.