MatchStix Fx100 Blue Handle-1.jpg

integrated multi-tool



  • Weight: 102g* for 15x100mm

  • Thru Bolts: 15x100mm, Boost 15x110mm, RS 15x150mm thru bolt lengths available

    • FOX Suspension Forks**

    • RockShox Suspension Forks***

    • RockShox Bluto Suspension Fork

  • Bits: Seven stainless steel bits included 6mm, 5mm, 4mm, 3mm, 2.5mm, 2mm and T25. You can carry 4 in the bit tube and the 5mm is integrated into the handle.

  • Chain Break: Integrated into handle.

  • Spoke Tool: Standard 3.23mm or "Black Handle"

  • Chain Link: Carries KMC 9, 10 and 11spd, SRAM 9 and 10spd.

  • Valve Core Remover

*Weight varies depending on bit selection and thru bolt specification and does not include chain link.
**Non-boost Fox36 forks with 20mm conversion kits are not compatible. Fox 34 Float 27.5 + forks require tightening before final fitment and clocking of handle.
*** Not compatible with RockShox RS1 forks.
The color BLUE and hues within this spectrum are a trademark of of Park Tool Co. and are used under license.

Everything you need. Nothing you don't.

The MatchStix multi-tool will take care of you when you're out there and need a little help. 
Integrated into your 15mm front thru bolt, the MatchStix handle seconds as a chain breaker, 5mm hex, spoke tool, and the bit receiver all in one. 

4 of the 6 stainless steel bits slide into the sleeve, and nestle into the thru bolt.
The bit holder end pulls double duty as a valve core remover, bit receiver for the chain break screw and as a chain link holder.


$75.00 chain breaker handle only
$50.00 thru bolt only

Replacement parts available upon request.

$145.00 for full MatchStix chain break model

  • MatchStix chain breaker handle

  • Thru bolt

  • Bit sleeve

  • 6 stainless steel bits

  • Bit holder end

  • Thru bolt washer

User Guide

Everything you need to know about the hardest working multi-tool on the trail.