Standard

1/1 GRCX

Built For

Disc brake gravel and CX bikes

Sizes

700c

Hole Count

28

Rim Inner Width

24.5mm

Adopting the proven technology of our 1/1 mountain line, the 1/1 GRCX brings off-road readiness to drop bar bikes. Our unasumming, but advanced 1/1 Road drive mechanism keeps pedal power transfer consistent and predictable, available at a split seconds calling courtesy of the 4 degree hub engagement. Offered with a 24.5mm inner rim design, the 700c GRCX rim shines on rides that see both road and gravel. Perfect for backcountry or touring adventures, 1/1 Road brings Industry Nine performance to new riders and new routes. Center Lock Only.

Features

6 Pawl 1/1 Freehub Body

Proven dual-phase configuration provides quick 4 degree engagement.

Classic J-Bend

Traditional and conventional flanged hubshell packed with i9 tech, but using a standard j-bend spoke and nipple. Find your perfect fit from our universe of options, and finish them off with the spokes and rims of your choice.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

SRAM XD-R Available

Compatible with SRAM road XD-R cassettes.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim Weight
700c1710g785g925g455g
Tire WidthTire TypeRider WeightInner Rim WidthOuter Rim Width
700X33-55Tubeless or Tube-Type Clincher280lbs or 127kg max 24.5 mm28.5 mm
Note:   Skewers Not Included

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Product must be purchased new from authorized dealer, valid for the original owner exclusively. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty. Use of tire inserts, tire casing type or tire air pressure being ridden does not alter or modify this warranty. Alloy rims can still be susceptible to impact damage when riding inserts, and/or using tires with heavy duty casings, and/or inflated to higher pressures.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.