Derek Harvey

Derek Harvey - Inventory Specialist

Dirt Jump 305

Built For

PUMP TRACKS AND DIRT JUMPS

Sizes

26"

Hole Count

32

Rim Inner Width

30.5mm

Found on Slopestyle podiums around the world, the DJ 305 is just at home on your local dirt jumps or pumptrack as it is dropping into Whistler Joyride or an FBM Tour stop. Combining our new and improved 26” EN305 v3 rim with our 32-hole Hydra mountain chassis delivers a DJ specific wheelset designed to compete at the highest levels. Ride and progress with confidence courtesy of an updated rim profile featuring a wide bead wall to help protect from pinch flats on those doubles that come up a bit short. Compatible with bolt-on, thru-axle, and QR frames, the DJ 305 is the last wheelset you'll need.

Level 2
Stock
Level 3

Features

32h Mountain System

Versatile, strong and stiff. Our 32h System hub and spoke chassis forms the foundation of our most capable wheelsets.

6 Pawl HYDRA Freehub Body

Our groundbreaking 690 P.O.E. Hydra Freehub body engages every .52 degrees yeilding telepathic control.

Premium Alloy Rim

High quality aluminum alloy with weatherproof sublimated graphics, tubeless friendly bead shelf, and a proprietary profile to keep dents at bay.

Ano Lab Custom Color

Design the wheelset of your dreams using our custom wheel configurator. Pick and choose from 11 different anodized colors to create a look as colorful or stealth as you wish.

Direct Thread - Straight Pull

Straight pull, integrated nipple, one-piece aluminum spokes that thread directly into the hubshell resulting in a solid, flex-free junction. No special tools or service procedures required.

2-Year Warranty

Warranty coverage against defects on your Industry Nine wheelset or Classic hubset.

  • Specs
  • Support
  • Warranty
SizeSet WeightFront WeightRear WeightRim WeightInner Rim WidthOuter Rim Width
26"1710g790g920g460g30.5mm35.7mm
Tire WidthTire TypeRider Weight
2.3-2.6Tubeless or Tube-Type Clincher250lbs/113kg max

Industry Nine Factory Service Rates

Industry Nine offers factory service on all of our products. Please contact us at 828-210-5113 or service@industrynine.com to set up a RMA # and discuss your needs.

System Wheel Rebuild$75*
Classic J Bend Wheel Re-build$85*
Front Hub Service$20*
Rear Hub Service$40*
Basic Wheel True$30*
Rim ReplacementsPrice varies depending on model

*Rates are subject to change by our service team

All product must arrive clean and without rotors, cassettes, and tires. Extra charges will apply for tire mounting or extra parts assembly. Industry Nine is not responsible for extra parts sent with wheels and hubs.

ALLOY PRODUCT WARRANTY

We offer a two-year warranty against defects in materials or workmanship on all Industry Nine products. Industry Nine will repair or replace, at our discretion, any affected components or assemblies. The warranty will apply to stems, MatchStix, hub shells, axles, drive mechanisms, spokes, and rims.

The intended application of Industry Nine products are non-motorized, single rider bicycles. Industry Nine will not be able to provide warranty support or assume liability for hubs or wheels that are utilized outside of their intended purpose. This warranty covers materials and workmanship but does not cover normal wear and tear, such as bearing wear, or damage due to lack of proper service intervals.

Spokes will be warranted against defects, but not trail accidents, drivetrain/frame mechanical failure, or foreign object intrusion.

Aluminum rims are covered under the two-year warranty but are not warrantied for impact or crash damage. Use of non-authorized aftermarket adaptors and/or modification of axles, hubs, spokes or any other component may result in a voided warranty. Modification of rim finish or graphics by use of stripping solvents or chemicals will void rim warranty.

We believe in our product and will try to give Industry Nine customers the benefit of the doubt in any case where the cause of failure is undetermined.