Classic Road Hubs

BG_Road_Blue_web.jpg
BG_Road_Black_web.jpg
BG_Road_Gold_web.jpg
BG_Road_Green_web.jpg
BG_Road_Lime_web.jpg
BG_Road_Orange_web.jpg
BG_Road_Pink_web.jpg
BG_Road_Purple_web.jpg
BG_Road_Red_web.jpg
BG_Road_Silver_web.jpg
BG_Road_Turq_web.jpg
BG_Road_Blue_web.jpg
BG_Road_Black_web.jpg
BG_Road_Gold_web.jpg
BG_Road_Green_web.jpg
BG_Road_Lime_web.jpg
BG_Road_Orange_web.jpg
BG_Road_Pink_web.jpg
BG_Road_Purple_web.jpg
BG_Road_Red_web.jpg
BG_Road_Silver_web.jpg
BG_Road_Turq_web.jpg

Classic Road Hubs

550.00
Add To Cart

  • Front Axles: QR 100mm
  • Rear Axles: QR 130mm
  • Hole Count: Front - 18, 20, 24, 28, or 32-hole.                                                                         Rear - 24, 28, or 32-hole.
  • Weight: Front hub 96-99g, Rear hub 235-243g
    331-342g/hubset
    Varies depending on hole count, bearings, and freehub spec.
  • Driver: Shimano HG, SRAM HG or XD-R or Campy
    6 degree engagement, 3 pawl freehub, 60 point drivering

The Torch road hub features all of the advantages of the Torch freehub -low drag, low weight, and the ultimate in freehub compatibility- tied into a traditional, "Classic" hub.

Road hubs use the same drive ring and pawls as the mountain hubs. However, we reduced the pawl count to 3 instead of 6 for lower drag and weight while still achieving an industry leading (for road hubs) 6 degree engagement.  Relocated bearings, and a new freehub seal reduce freehub drag while coasting.  

The Torch road hubs now feature custom Teflon contact seals for the end caps, which we manufacture in-house. They fully seal the hubs from mud and water - tight enough for a muddy CX season, but smooth enough for drag-free road miles.