- Weight: Set 1650g, Rim 550g, Front 740, Rear 910,
- Front Axle: QR 100mm
- Driver: Shimano/SSRAM HG, Campy 11-speed, or SRAM XD-R
6 degree engagement, 3 pawl freehub, 60 point drivering
- Rim: 16.5mm inner width // 27mm outer width // 58mm depth
- Rear Axle: QR 130mm
- Rider Weight: Recommended 250lbs/114kg max
- Note: Skewers Not Included
Unlike competing rims
C58Aero rims utilize a sharp trailing edge that maintains air attachment better in crosswinds. At 1650g they offer an advantage in triathlons, road racing, or your local group ride, but won't weigh you down if there are some hills along the way.
24 hole 2/1 lacing pattern
Found on all of our rear road wheels, this lacing pattern reduces wheel weight and promotes even spoke tensions, while maintaining excellent durability. Rear wheels feature 16 spokes on the rear drive side flange, paired with 8 opposing spokes. Due to the rear wheel dish caused by the cassette on the rear wheel, this orientation evens out spoke tension. It also reduces peak stress loads on the spokes and rim, as well as the fatigue cycle incurred in a traditional 24 spoke wheel - allowing a lower spoke count and lighter weight, without the durability issues and increased rim weights commonly associated with low spoke count wheels.
Rated to withstand 700 ft/lbs of torque! We reduced the pawl count to 3 instead of 6, for lower drag and weight, while still achieving and industry leading (for road hubs) 6 degree engagement. Relocated bearings, and a new freehub seal reduce freehub drag while coasting.
Carbon road wheels feature a 2 year warranty on hubs, spokes, and assembly, and a two year warranty on the rims - rims must be used with Reynolds Cyro-Blue brake pads to maintain the rim warranty.